3D Zombie Brain Design – Funny Undead Skull with Glasses & Brains
3D Zombie Brain Design – Funny Undead Skull with Glasses & Brains
Get spooky and hilarious with this 3D Zombie Brain design! Featuring a creepy yet cartoonish blue zombie wearing retro red-and-blue 3D glasses, holding a bloody bowl of brains, and surrounded by floating skulls with exposed brains, this artwork is perfect for fans of horror humor and Halloween fun. Ideal for T-shirts, hoodies, posters, stickers, and party gear, it’s a must-have design for the spooky season.
🧟♂️👓 A mix of creepy and funny — the ultimate zombie design for Halloween or year-round horror lovers!
Couldn't load pickup availability
-
Description
-
How to Use
- Size Of Transfer: Width 9"-11"
- Artwork Is Transparent
- Apparel Not Included
Where Can You Use Them
You can easily apply these transfers on:
- Apparel: T-shirts, sweatshirts, hoodies, hats, and more.
- Home Textiles: Pillowcases, bags, tote bags, etc.
- Promotional & Gift Items: Customized products for special events, campaigns, or personalized gifts.
They work on cotton, polyester, or blended fabrics, ensuring your designs remain vibrant and long-lasting.
How to use with Heat Press
NOTE: Pre-Heat your Heat Press to reach 260+/- degrees. - HOT PEEL
1. Press your blank apparel on the side you will have your design, to give it a nice smooth surface.
2. Place your DTF Transfer in the exact location you want.
3. Cover your DTF Transfer with teflon on or parchment paper
of the same size or larger. This will help avoid your transfer from
lifting.
4. Use your preheated Heat Press at 260 degrees to press down with medium pressure for 12 seconds.
5. Peel off the backing of your DTF transfer immediately (quickly).
6. Optional - Do a final press of 7-10 seconds using teflon or parchment paper
How to use with Home Iron
Using an iron:
1. Set your iron to the highest cotton setting without
steam.
2. Preheat your garment for a few seconds to remove any moisture and wrinkles.
3. Place the transfer face down on the garment, making sure it's centered and
aligned.
4. Apply firm and even pressure while moving the iron in a circular motion for
about 20-30 seconds.
5. Allow the transfer to cool down completely before peeling off the backing
paper.
6. Do a final press of 7-10 seconds using teflon or parchment paper